A cocoon harness is a traditional “open back” design. It is the more lightweight type, is easier to rock upright for landing, and doesn’t introduce the complexity of zippers.
A pod harness is an “open front” design where you zip up the leg portion after launching. It has more storage capacity for bags and gear and keeps you protected from the cold.
Contents
Used Harnesses


New condition, never flown, made for 6ft+ 200lb pilot, with bag. More pics here.
Woody Valley Libero Pod Harness
The Libero is Woody Valley’s latest and most popular lightweight pod harness.









Price: $1,449
LIBERO ORDER FORM (fill out and attach below, or contact me with the info)
The Libero is suitable for beginners and experienced pilots alike. It is comfortable and made to be very lightweight. Made in Italy.
- Only 9 lbs including carabiner and backpack (chute extra)
- Packs small in backpack
- No backplate, just 4 pipes that allow body movement
- Finsterwalder 76g aluminum carabiner
- Radio and accessory pocket on the opposite side of the rescue parachute
- Drogue chute pocket
- Loops for tow and winch launch
- Replaceable boot protector
- Inner pocket for glider bag and bladder
- Two wide outer side pockets
- Cam cleat line for the angle-of-dangle adjustment
- Velcro-attached outer skin that is replaceable or repairable
- Optional left-mounted chute pocket

Woody Valley Flex 2 Pod Harness
A classic pod made with heavy duty material to withstand many years of regular use. Suitable for beginners on up.




Price: $1,475
FLEX 2 ORDER FORM (fill out and attach below, or contact me with the info)
- Steel carabiner with breaking load of 31 kN / 7,000 lbs
- Aerodynamic plastic footrests that can be used as a container
- Side chute container
- Large internal pocket for storing the harness backpack and glider bag, with separate compartment for bladder
- Storage pocket behind the emergency parachute.
- Radio and camera pocket on the side opposite the parachute
- Traditional, tested variable incidence system with main sliding hook on the bearing bridle inserted in the back board
- Two fiberglass spreader plates, at back and hips
- Weight including carabiner and backpack ~17 lbs
- Built-in drogue chute container
- Front removable zipper with Velcro
- Aerotow and ground tow loops
- Replaceable foot rest protection
- Protective flap over the chest for hard landings
- Cam cleat line for the angle-of-dangle adjustment
- Color choices of black, blue, red, or grey for main color and side pocket
A modified version of the Flex 2 for tandem pilots is available.
Woody Valley Tenax 4 Pod Harness
One of the most popular high-performance harnesses out there, now in its 4th generation.

Price: TBD
TENAX 4 ORDER FORM (fill out and attach below, or contact me with the info)
- Steel AustriAlpin Delta Tropos carabiner with breaking load 31 kN / 7,000 lbs
- Aerodynamic plastic footrests that can be used as a container
- Side parachute container
- Carbon-kevlar backboard
- Large internal pocket for storing the backpack and the glider bag with separate compartment for water bladder
- Storage pocket behind the emergency parachute
- Radio and camera pocket on the side opposite the parachute
- Traditional, tested variable incidence system with main sliding hook on the bearing bridle inserted in the back board
- Weight including transport rucksack 17.2 lbs
- Built-in container for drogue chute (drogue chute optional)
- Front removable zipper with Velcro
- Aerotow and ground tow loops
- Replaceable foot rest protection
- Velcro-attached outer skin that is replaceable or repairable
The backplate on the Tenax 4 is wider than previous model for comfort. However, for shorter sizes the backplate is shorter for an easier launch run.








Wills Wing Flylite Cocoon Harness
Re-released in 2026 and better than ever!




Wills Wing Mexico is now producing the cocoon harness that was made popular by Wills Wing CA, with design improvements to what was already the best cocoon ever made.
Price: $936.00
FLYLITE ORDER FORM (fill out and attach below, or contact me with the info)
Features now included standard:
- Custom sizing
- Harness bag/backpack
- 420 denier double-coated diamond nylon rip-stop outer body
- Color choice on outer body of red, blue, or black
- Full length Antron™ cloth interior lining
- 10,000 pound steel carabiner
- Front mount parachute container with internal adjustable size baffle
- High density, ultra durable, ¼” Volara closed cell foam
- High density foam padded shoulder pads
- Adjustable leg loops
- Adjustable chest strap
- Aerotow loops
- Curved aluminum foot bar that is easy to step into
- Entire load structure sewn around the harness body for safety in case of a fabric tear.
- Front lower pocket for bags
- Small upper chest pocket
- Tow loops
- Vinyl boot skid
- Boot clip for launching, plus a rope to secure the boot up by hand if desired





Options:
- Vinyl front skid – $91. This durable vinyl covers the parachute container and bottom portion of the harness. It helps protect the harness when doing wheel landings on a regular basis, such as for tandems. The entire vinyl skid is attached by velcro and is replaceable. If this option is not purchased, mating velcro will not be sewn onto the front of the harness.
- Drogue chute pocket – $89.
We put a lot of thought into making the best production cocoon ever, not just something simple and easy to crank out. I was production on them for a while, till we got more orders than I could keep up with because a great cocoon quickly became more popular than I expected. Admittedly I also had some lessons to learn about perfectionism vs production, where I wanted every stitch perfect like art and that’s just not sustainable.
I’m really glad the FlyLite will live on!
– Ryan Voight, part designer for the Flylite for Wills Wing CA
Moyes Eaze
The Eaze is a partial-cocoon training harness, also called an apron harness.


Unlike a full cocoon harness, this harness main body only goes past your hips, and there is a foot stirrup to hold a prone position, or it can be used without the stirrup for an upright body position on the training hill. By default it does not include a parachute container, storage bag, or carabiner.
This harness is ideal for training students or for playing around soaring dunes. It’s made with heavy duty material, but the minimalist design makes the total weight remain very light, ideal for a harness you’re repeatedly hiking up hills with.
Price: $732
EAZE ORDER FORM – (fill out and attach below, or contact me with the info)
- Adjustable foot stirrup
- Supportive main body
- Heavy duty 1000 Denier Cordura fabric
- AustriAlpin buckles
- Made in-house at the Moyes facility in Australia
- Color options for main body and piping
- Weight 5.5 lb (M)
- Sizes: S (5’2″-5’6″), M (5’6″-6′), L (6′-6’4″)
Options:
- Storage bag and carabiner – $145
- Front mounted parachute container – $89
- Adjustable leg loops – $81

Place an Order
David Kiesling 510-754-6842 ( call / text / Whatsapp )
